Home -> Products -> ELT Accessories
The Artex ELT to NAV Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the 406 MHz series of ELTs (G406-4, C406-1, C406-2, C406-1 HM, C406-2 HM) to allow transmission of position data with the distress signal.
The Artex ELT to NAV-B Interface is designed to be connected between the aircraft's Flight Management Computer (FMC) or GPS receiver and the B406-4 (Boeing) ELT to allow transmission of position data with the distress signal.
Many of the existing TSO C91a installations with Joliet, Pointer and Narco 121.5 MHz ELTs utilize only 2 wires between the cockpit remote switch and the ELT. Other manufacturers of 121.5 MHz ELTs use 3 or 4 wires. The Artex 2-Wire Remote Interface uses just 2 of the existing wires from the wiring harness to connect the new cockpit remote switch to an Artex 406 MHz ELT for a simplified, cost-efficient upgrade.
The Artex DGL-1 programming dongle allows the operator to easily program aircraft 24-bit (Standard Message Protocol) address into a compatible ELT.
The ETS ELT Test Set is a rugged and waterproof handheld device to read the transmitted code of a 406 Mhz Cospas-Sarsat ELT. The beacon ID and all encoded data is displayed on the reader. The data is saved to a database, and is time-stamped.
The TPS Connector Removal Tool helps to unplug even the most awkwardly located connectors to allow for quick ELT (C406-1, C406-2, C406-1 HM and C406-2 HM) removal for maintenance.
Where To Buy This Tool: Newark Element 14
Artex ME406 Series ELTs are designed such that multiple protocols can be selected and changed in the field. The ME406 ELT Reprogramming Adapter is a product support device used to reprogram ME406 ELTs from non-location (short message) protocols to location (long message) protocols prior to installing the ME-183 Navigation Interface.
When reprogramming an ELT, pertinent information from the original protocol message is incorporated into the new protocol message, maintaining Cospas/Sarsat requirements. The Reprogramming Adapter verifies the new protocol programming as part of the reprogramming operation. After successful completion of the reprogramming operation, the owner must re-register the ELT with the appropriate registration authority.
The Artex Programming Adapter PA is an optional accessory for the C406-N series of ELTs and will automatically reprogram a C406-N ELT overwriting previously stored data for efficient fleet maintenance.
Test your 406 MHz Emergency Locator Transmitter through the Cospas-Sarsat Satellite System to ensure the ELT is working properly and the installation has been completed correctly. Visit 406Test.com
